Submersible pump set (low cost)

Product code:
12.12.SA

Applications:

  • Monitoring well installation
  • Water quality research
  • Monitoring water quality
  • Anaerobe sampling
  • Water sampling
  • Ground water sampling

This low cost submersible pump set is suitable for use in monitoring wells with a diameter of minimal 40 mm. The set includes three submersible pumps “Gigant”, three booster pumps, a roll of extension cable, sealed crimp splices (to make a waterproof cable extension), a roll of polyethylene sampling tube and a battery with battery charger. Both pumps are small centrifugal pumps with small but powerful motors. This allows them to fit in narrow monitoring wells. The Gigant pump can push water to a height of 10 meter. The Booster pumps have the samecapacity and can be applied as boosters.

By fitting one or more Booster pumps directly over a Gigant pump the pressure can be raised to 20, 30 or more meter. The pumps can be used for purging a new sampling filter. Connecting the pumps to the regulator of the peristaltic pump 12 Vdc allows for setting a relaxed speed. This allows the pumps to be used also for taking samples (the regulator can power a maximum of two pumps with a maximumsampling depth of approx. 12 meter). The low price of the pumps makes it possible to use them only once. This prevents the risk of cross-contamination.The pumps are made from non-toxic ABS plastic and are fitted with a stainless steel impeller.

Benefits Submersible pump set

  • Stainless steel impeller + unbreakable ABS housing
  • Giant type (12.12.06) fitted with bottom filter
  • Booster type (12.12.08) for in-line placement between 10 x 12 or 12 x 16 mm tubing
  • Use 1 Giant pump with 1 (this set), 2, 3 or 4 booster pumps to go 10, 20, 30 or 40 m deep
  • Large flow capacity, ideal for purging
  • Connect with 12 VDC battery for 14 m lift (2 pumps)
  • Connect with 18 Volt for lift of 22m (2 pumps)
  • Can also be powered and speed regulated from 12.25 peristaltic pump (limited max lift)
  • Can be re-used for metal analyses

Remarks

  • Will dissolve in hydrocarbons
  • Should be discarded after use in hydrocarbons (plastic contaminated
  • Voltage loss should be corrected to 18 or 24 VDC when used at larger depths

Downloads

Gallery

Other buyers were interested in:

Grundfos MP 1 submersible pump sets

Grundfos MP 1 submersible pump sets

Product code: Grundfos MP 1 submersible pump sets

The Grundfos MP 1 pump used in the Grundfos MP 1 submersible pump sets is specially designed for...

More information

Water pump with combustion engine

Water pump with combustion engine

Product code: 12.08

This self-priming (up to a depth of 6 meter) centrifugal pump is used primarily for (fast)...

More information

Tube dispenser for tube

Tube dispenser for tube

Product code: 12.20

PE tube Benefits LDPE tubing Fit for all types of water samplings Very cheap,...

More information

Peristaltic pump standard 12 Vdc

Peristaltic pump standard 12 Vdc

Product code: 12.25

This peristaltic pump, specially designed for use in the field, is battery powered and...

More information
View all related products

We use cookies to help give you the best experience on our site and to show you relevant advertising. If you continue to use this site, we’ll assume that you accept all cookies for eijkelkamp.com.

OK