Peristaltic pump 12 VDC Advanced

Product code:
12.35.SB

Applications:

  • Environmental soil research
  • Monitoring well installation
  • Water quality research
  • Monitoring water quality
  • Anaerobe sampling
  • Water sampling
  • Ground water sampling

Familiar quality in a new improved look!

This peristaltic pump suitable for field use (item no.: 1235) is battery-powered and is microprocessor controlled. The microprocessor provides adjustable constant speed, overload protection and various external control functions. A built-in maintenance-free 12 Volt lithium-ion battery (10 Ah) makes it possible to use the pump for two to five hours at a time (depending on the load). The housing is the highest degree splash-proof (IP 66) and can function safely and without problems in the field.

  • Contemporary design
  • Digitally controlled peristaltic pump
  • Stable pump speed with a constant flow rate between 50 ml-2000 ml/minute
  • Display of rotations per minute and battery percentage
  • Battery indicator
  • Designed for long and frequent use
  • To be used with the prescribed silicone tubes
  • Suction head up to 6-9 meters
  • Basic tool for all groundwater research
  • Ideal for purging and sampling with the low-flow sampling method of groundwater monitoring wells

Applications

  • Suitable for purging monitoring wells for several hours continuously (by using more than one peristaltic pump time can be saved).
  • In-line filtration for sampling of groundwater using the filter holder or 0.45 micron disposable filters for removal of soil particles from water samples.
  • Impeller pumps can be connected to the peristaltic pump to be able to pump large quantities of water out of monitoring wells, for instance during well development after they have just been placed.

 

Other buyers were interested in:

Flow-through cell compact

Flow-through cell compact

Product code: 18.56

Flow-through cell compact for measurements without air contact. Short response time due to small...

More information

Filterholder Ø 142 mm for in-line filtration

Filterholder Ø 142 mm for in-line filtration

Product code: 12.31.01

The filter apparatus, suitable for field and laboratory, has a net filtration area of 130 cm2....

More information

Silicone tube, 6 x 10 mm, 5 m

Silicone tube, 6 x 10 mm, 5 m

Product code: 122048

Silicone tube, complete with polyamid tube clamp, Ø 6 x 10 mm, pressure head lift 5.5 m, roll...

More information

PE tube, Ø 6 x 8 mm, 100 m

PE tube, Ø 6 x 8 mm, 100 m

Product code: 122004

Polyethylene tube, Ø 6 x 8 mm, roll of 100 m, with KIWA-certificate K65540/02.

More information

Submersible pump set (low cost)

Submersible pump set (low cost)

Product code: 12.12.SA

This low cost submersible pump set is suitable for use in monitoring wells with a diameter of...

More information
View all related products

We use cookies to help give you the best experience on our site and to show you relevant advertising. If you continue to use this site, we’ll assume that you accept all cookies for eijkelkamp.com.

OK