Monitoring well pipes & accessories

Product code:
10.01

Monitoring well pipes are used to compose monitoring wells and piezometers. Monitoring well pipes are available in different materials and diameters, and are supplied in PE packaging. All pipes have the following properties:

  • Free of dust and sawdust.
  • Demonstrably very low level of leaching.
  • Large open surface.
  • Normalized slit width (0.3 mm).

HDPE pipes with screwthread connection

These pipes cause no water pollution and provide high monitoring quality. HDPE provides satisfactory results, and it is much cheaper than Teflon. The pipes are provided with leak-proof threaded connections. The pipes are easily connected during sinking, and a  smooth well pipe is realized. Suitable for deep monitoring wells.

HDPE pipes with clamping socket connections

These HDPE pipes are provided with a  clamping socket and have a thin wall. The pipes are suited for application in wells that monitor the first water containing layer at 6 meter at most.

PVC pipes without trace metals with connection mouths

These PVC pipes are produced with a fully organic stabilizer, causing no contamination. The pipes can be used for all organic and anorganic analysis. The pipes are provided with waterproof connection mouths, no glue is required for mounting. A sturdy slim well pipe is realized.

Accessories for well pipes:

  • Top and bottom caps for all pipes.
  • Filter gauze from unique specially produced
  • un-oiled yarn, used to prevent silting up.
  • Hand operated bailer boring equipment for
  • the usual drilling of a well (see P1.02).
  • Electrical percussion hammer, used for installation
  • of small diameter wells (see P1.10).

Other buyers were interested in:

Hand-operated bailer boring auger set 7m

Hand-operated bailer boring auger set 7m

Product code: 01.12.SA

The standard bailer boring auger set is suitable for augerings to a depth of about 7 meter. The...

More information

Filter pipe pre-packed Ø 20mm, 5x

Filter pipe pre-packed Ø 20mm, 5x

Product code: 10.05.01.20

Filter pipe, HDPE, Ø 20x15 mm, Length 100 cm, slits 0.3 mm, with filter sand (outside Ø...

More information

Direct-well filter, Ø 36 mm, 5x

Direct-well filter, Ø 36 mm, 5x

Product code: 10.04.30

Direct-well filter, Ø 36 mm, length 1 m. Filter pipe with filter gauze and synthetic adaptor...

More information

Well protection materials

Well protection materials

Product code: 10.02

To protect monitoring wells (and piezometers) against traffic, destruction, contamination and...

More information

Bentonite QSE, white sack, 25 kg

Bentonite QSE, white sack, 25 kg

Product code: 10.97

Besides bentonite plugs, Eijkelkamp Soil & Water also supplies bentonite pellets in bags....

More information

Filter sand out of a pit, sack of 25 kg

Filter sand out of a pit, sack of 25 kg

Product code: 10.98.03

Filter sand, supplied in bags and pallet packages The filter sand, consisting of 99.5% SiO2,...

More information
View all related products

We use cookies to help give you the best experience on our site and to show you relevant advertising. If you continue to use this site, we’ll assume that you accept all cookies for eijkelkamp.com.

OK