Augering & soil sampling equipment

Product code: 01.11.SE

The ergonomic hand auger set for heterogeneous soils is used to carry out manual drilling and...

Product code: 07.53.SC

Sample ring kit model C, standard set to a depth of 2 m. For soil sample rings Ø 53 mm.

Product code: 04.16

Soil sampling for the determination of the presence of very volatile components such as benzene,...

Product code: 04.02.SA

Hand-operated equipment can be applied for soil research up to a depth of 5 to 10 meter. The...

Product code: 04.19.SC

The Eijkelkamp percussion drilling set for heterogeneous soils with gasoline powered percussion...

Product code: 04.19.SE

With the percussion drilling set for heterogeneous soils with heavy electrical percussion hammer...

Product code: 04.14

Van der Horst core sampler. Set for sampling to a depth of 7 m.

Product code: 04.09

The stainless steel peat sampler is in fact a kind of gouge auger. The peat sampler is pushed...

Product code: 04.11

Using the Akkerman core sampler, samples are taken in stainless steel sampling tubes in auger...

Product code: 05.09

The peat profile sampler, type Wardenaar, is an apparatus for sampling intact, undisturbed peat...

Product code: 05.08

The profile sampler allows taking of a sizeable and virtually undisturbed sample up to a depth...

Product code: 05.02

By applying the bi-partite root auger almost undisturbed, uniform soil samples can be taken in...

Product code: 08.09

Core cutter method, according to Dutch RAW-standard 2010, test no. 6

Product code: 04.17

The split tube sampler is an apparatus for rapid undisturbed sampling at the surface. The...

Product code: 99.14

You are also fully-mobile in the field with the collapsible fieldcart. The sturdy aluminium...

Product code: 01.12.16.10.B

Sampling during batch inspection and sand dredging Sampling loose discharged sand, dry coarse...

Product code: 04.18.07.01

Without too much effort the gouges can be extracted from the soil by using rod pullers, which...

Product code: 04.19.43.01

A set which you can use the core sampler of the percussion drilling set with a thin PE foil...

Product code: 04.19.43

In addition to ordinary percussion gouges it is possible to apply a core sampler with a...

Product code: 15.20

When a promising aquifer has been found, a pump  test lasting one hour and some simple...

Product code: 99.07

Geologist hammers can be obtained pointed or with a blade. They are used to obtain a rough...

Product code: 05.10

Grass plot sampler large, Ø 23 mm, operational length 10 cm, total length 95 cm

Product code: 05.03

These stainless steel gouge augers with different dimensions consist of a steel auger pipe, a...

Product code: 04.06

A correctly dosed fertilization is a condition for high yield and good quality. From economic...

Product code: 04.03

This bi-partite gouge auger distinguishes itself from other gouges by the cylindrical tapered...

Product code: 04.04

Hand-operated equipment can be applied for soil research up to a depth of 5 to 10 meter. In this...

Product code: 04.01.SA

Hand-operated equipment can be applied for soil research up to a depth of 5 to 10 meter. In this...

Product code: 02.01.01

A tripod is an essential part of a bailer boring set (cable tool drilling equipment). Also...

Product code: 15.09

The heavy lifting set is usually used in combination with heavier (hand-operated) drilling...

Product code: 01.12.14.07.B

Stone catcher This auger type is used to remove loose stones from the auger hole....

Product code: 05.07

Soil column cylinder auger, type Stiboka. Set for sampling to a depth of 1 m

Product code: 01.16

Eijkelkamp Soil & Water composed a prospecting kit for general geological surveys. The...

Product code: 20.07

Flap gouge auger for depth specific samplings in dry or wet material, standard set to a depth of...

Product code: 05.01

Root research is executed to improve the insight in the possibilities for root growth (depth and...

Product code: 01.11.SO

01.11.SO. Augerings and samplings in homegeneous soils (soils with an uniform soil profile), in...

Product code: 01.12.SA

The standard bailer boring auger set is suitable for augerings to a depth of about 7 meter. The...

Product code: 25.09.31.10

Casing tube, synthetic (ABS) with steel screw thread sockets, Ø 90 x 76 mm, length 1 m, left...

Product code: 25.12.31.10

Casing tube, synthetic (ABS) with steel screw thread sockets, Ø 125 x 108 mm, length 1 m, left...

Product code: 02.02.06

Winches are used for lifting and hoisting activities in the field. They are fixed to one of the...

Product code: 15.05

This Eijkelkamp Soil & Water set is developed and used for the construction of hand-drilled...

Product code: 04.15.SA

With these sets, with bayonet connection, undisturbed soil samples can be taken in a liner...

Product code: 01.10.01.B

Handle, normal, 60 cm, bay. (incl. coupling sleeve)

Product code: 01.12.15.07.B

This special type of Edelman auger has an extended auger body (sensitive to torsion) and is...

Product code: 10.100

Drilling a bore hole is often combined with sampling and describing a profile. If both these...

Product code: 01.02.01.07.B

The typical design of the Edelman auger allows for a minimum of friction during penetration into...

Product code: 01.02.03.07.B

The typical design of the Edelman auger allows for a minimum of friction during penetration into...

Product code: 01.02.04.07.B

The typical design of the Edelman auger allows for a minimum of friction during penetration into...

Product code: 01.02.02.07.B

Edelman auger, bottom part, combination type, bayonet, Ø 7 cm

Product code: 01.06.00.07.B

Auger for stony soil, bottom part, bayonet, Ø 7 cm

Product code: 01.04.00.07.B

This design is very suitable for augerings in hard, stiff soils, mixed with fine gravel both...